In the construction machinery and equipment used in industry and everyday life very important role played by the clutch. The clutch is a device for connecting shafts to transfer torque, in other words it is a combination of components used to connect two independently rotating shafts embedded, active - and passive diesel - driven. All of this is to transfer torque from one shaft to another.
The construction consists of a clutch driving member - the so-called. active, which is installed on the driving shaft, the output drive - passive, installed shaft-driven, and other items linking the entire structure. Element of the total may be one or more parts of machinery or some other factor. For example, use a hydrokinetic coupling is another factor, which in this case is a liquid (usually it is oil or water). In this type of clutch, the rotary motion of the active to the passive element is transferred through the liquid.
Another interesting and special kind of coupling is also called a swing clutch clutch a Cardan joint or Cardan.
coupling Cardan works differently than a hydrokinetic coupling.
cardan coupling is made up of cross-connector so that such a combination allows for the transfer of power between shafts significantly bended to each other.
Using clutches, drivetrain assemblies, motors and other mechanisms work can be carried out as separate units of machinery and equipment, and then combine them with the installation. The use of different types of couplings gives a very high potential in the design of machines, because, some, very complicated structures would be impossible to enforce.
0 comments:
Post a Comment